Solda Power Jet #2 is a block fluoro powder for 21 to 14F (-6 to -10C); air humidity > 60%
22g
Power Jet blocks are solid blocks of the fluoro powders that are processed in molds under extreme pressure into solid blocks. They are generally used by rubbing the block on the base of the ski to produce a thin film. This film is then smoothed with a cork rubbing back and forth rapidly. Once corked in, use a horsehair brush to finish the application.
These waxes are good for starts and short sprint races. To make a longer lasting application, rub on a good thick layer of the wax and iron it in. Repeat the process again an second time and let the ski cool. Scrape and brush as usual.
Snow temperature guidelines for Power Jets are as follows:
-
PJ #1: 34 to 21F (+1 to -6C); air humidity > 60%
-
PJ #2: 21 to 14F (-6 to -10C); air humidity > 60%
-
PJ #3: 19 to -4F (-7 to -20C); air humidity > 60%
-
PJ #4: 25 to 9F (-4 to -13C); air humidity 30-100% (carbon additive+fluoro) for drier conditions.
-
PJ #5: 34 to 28F (+1 to -2C); air humidity > 60% This is for really warm, sunny weather and wet spring snow.