Ski Go HF High Fluorocarbon Glide Waxes are high-quality, broad-range waxes for high humidity conditions. These high fluoro glide waxes provide high performance for all types of snow. They provide optimal speed when humidity conditions are > 65%.
These waxes can be used as the under-layer to the high and pure fluorinated waxes and the cold powders to help improve durability. For use in races and time trials.
Yellow (formerly C242): For all snow types +20C to -1C humidity > 65%. Iron 125C. This is hard to beat when it gets wet.
Orange (previously Yellow) New to transforming snow types, +1C to -5C humidity > 65%. Iron 125C
Red (previously Violet) For Granular and artificial snow, +1C to -5C humidity > 65%. Iron 145C.
Violet (previously Ultima): For older and abrasive snow, -1C to -12C, Humidity > 65%. Iron 145C. Also use as underlayer for pure fluoros in aggressive snow conditions. Very durable.
Blue (formerly Newsnow): For New Snow -3C to -10C, humidity > 65%. Iron 130C
Green (formerly Blue): All snow types, -7 to -20C humidity > 65%. Iron 145C.
Application: Allow waxing iron to warm to temperature indicated on box. Drip wax onto the ski base in small dots evenly from tip to tail. Warm wax dots with the iron so that the wax flows across the ski. The wax should remain molten for a short period of time. Let the skis cool (at least 10 minutes). Now scrape the excess wax from the base and follow by brushing with a nylon brush. For Violet, Green and Blue you may lightly brush with a brass brush because they are so hard, but do finishing polish with a nylon brush.
Hints: In the -5C to -8C range blend Orange and Green together 1:1 when the snow is not abrasive. For longer races/loppets use the matching regular glide as an underlayer for increased durability. Double wax the HF layer if it is the top layer to ensure maximum coverage for top speed and acceleration.
200g (note the image shown says 60g, but this is the 200g bulk package)